e.avery
| Joined: | Tue Apr 4th, 2006 |
| Location: | Kentucky USA |
| Posts: | 2722 |
| Status: |
Offline
|
|
I am glad that the progress has been made and that the printing on the dial has been addressed. That was the only concern that I had due to the tooling up cost for small run would be great. The engraving of the case back and between the lugs will work and be cost effective. The only input is that the type of engraving needs to be deep. Using a 45 degree channel, and a cutting depth of .5mm should work as a general idea in order to stand out on the case back. Did not mean to add complicating factors just food for thought. Since it will be all hand done and not in the casting it should be easy to accomplish.
|
