TimeTechTalk.com Home


Welcome to 3T! Please take the time to register and join in on the friendly,knowledgeable watch talk.Please note that not all registrations will receive an immediate activation e-mail.Those who do not receive an immediate notification will be activated manually within 48hrs. by an admin. without an e-mail activation url sent to you,you may then sign in using your username and password,if you feel there is a problem please e-mail us at timetechtalk@hotmail.com and include your name and username and we activate your account.Thank You!

 Moderated by: 3T  
AuthorPost
oagaspar
Site Founder


Joined: Sun Sep 4th, 2005
Location: Akron, USA
Posts: 28151
Status: 
Offline
I opened up my Kazimon 1500 by request of a friend who pointed me to a thread on another forum where some guy who doesn't even own a Kazimon posted that Kazim does not use elabore or top grade movements and only uses low to mid grade etas???.....this is my 1500 and it is an elabore eta 2824-2 with incabloc shock system,glucydor balance wheel and ball bearing rotor with a double o-ring caseback... not a base eta...the 1500 is also 100% German made including the dial and hands....so I hope this eases your mind as to what you will be receiving in a Kazimon....I have inside looks of other Kazimon watches posted in this forum and all of them use an elabore or better Swiss eta...the Drei actually uses a fully decorated top/chronometer grade Val. 7750!...ThumbsUp02.gif

Attachment: 032.JPG (Downloaded 294 times)

Willieboy
3T WIS


Joined: Sat Apr 26th, 2008
Location: South Texas, New Jersey USA
Posts: 1188
Status: 
Offline
Thanks for the pic Oscar. Don't you ever worry about taking your watches apart? I'd be afraid to screw something up and lose the water resistance.

oagaspar
Site Founder


Joined: Sun Sep 4th, 2005
Location: Akron, USA
Posts: 28151
Status: 
Offline
nope...doesn't bother me and as long as you tighten it back down the same it won't affect the WR ....all watches are pressure tested, water tested or both for water resistancy and there are no guarantees a watch will keep the rating after a while or even after it leaves the factory...during shipping if not packaged properly or dropping a watch can change the WR as it may loosen a seal in the crystal,crown and caseback areas....just like servicing any watch a dive watch should be checked once a year for water resistancy as a part of regular maintenance....below is a good read on WRThumbsUp02.gif
http://smhosein.tripod.com/id3.html

Hammerfjord
Moderator


Joined: Thu Apr 16th, 2009
Location: Arctic, Norway
Posts: 5821
Status: 
Offline
And the movement is holded in 2 places by solid clamps hooked in the caseThumbsUp02.gif
They show on each extremities of the rotor: You can observe the screw-heads who hold them in the movement's borders...
Somes could think that it is allways made this way, but it's not and I observed free movements in many watch-cases: Just holded in place by them stem.
Kazim do a solid job: There's no doubt.
Thanks Oscar!

JayVeeez
3T WIS
 

Joined: Tue May 18th, 2010
Location:  
Posts: 2
Status: 
Offline
Thanks for posting.  Good to know what I'm getting into with a 1500 inboud... 


I'm pretty excited!  snoopy1.gif


Thanks! 

bigrustypig
3T WIS


Joined: Sat Apr 11th, 2009
Location: Auckland, New Zealand
Posts: 7504
Status: 
Offline
Hammerfjord wrote: And the movement is holded in 2 places by solid clamps hooked in the caseThumbsUp02.gif
They show on each extremities of the rotor: You can observe the screw-heads who hold them in the movement's borders...
Somes could think that it is allways made this way, but it's not and I observed free movements in many watch-cases: Just holded in place by them stem.
Kazim do a solid job: There's no doubt.
Thanks Oscar!

William, good observation and thanks for pointing this very important detail about the Kazimon watches. Really makes a lot of difference and comfort for the movement to be "tight" and not get bumped around inside the case held merely by a stem.ThumbsUp02.gif

 

Last edited on Sun May 23rd, 2010 03:08 am by bigrustypig

Hammerfjord
Moderator


Joined: Thu Apr 16th, 2009
Location: Arctic, Norway
Posts: 5821
Status: 
Offline
bigrustypig wrote:
Hammerfjord wrote: And the movement is holded in 2 places by solid clamps hooked in the caseThumbsUp02.gif
They show on each extremities of the rotor: You can observe the screw-heads who hold them in the movement's borders...
Somes could think that it is allways made this way, but it's not and I observed free movements in many watch-cases: Just holded in place by them stem.
Kazim do a solid job: There's no doubt.
Thanks Oscar!

William, good observation and thanks for pointing this very important detail about the Kazimon watches. Really makes a lot of difference and comfort for the movement to be "tight" and not get bumped around inside the case held merely by a stem.ThumbsUp02.gif

 


Yes amigo: Thank you!thankyou.gif

oagaspar
Site Founder


Joined: Sun Sep 4th, 2005
Location: Akron, USA
Posts: 28151
Status: 
Offline
this is what you will find inside the Drei....a top/chronometer grade fully decorated Valjoux 7750! ThumbsUp02.gif

Hammerfjord
Moderator


Joined: Thu Apr 16th, 2009
Location: Arctic, Norway
Posts: 5821
Status: 
Offline
oagaspar wrote:
this is what you will find inside the Drei....a top/chronometer grade fully decorated Valjoux 7750! ThumbsUp02.gif



This is high grade: Chronometer grade apparently...Look the balance wheel: Is that some flare spokes Oscar? It look like it.ThumbsUp02.gif

Kazimon
3T WIS


Joined: Tue Sep 18th, 2007
Location:  
Posts: 218
Status: 
Offline
thank you Oscar showing some of the quality things which i was thinking are normal if you want to make a good watch.
seems that some people on another forum who are trying to blame me doing this by purpose. well let them talk....

Hammerfjord
Moderator


Joined: Thu Apr 16th, 2009
Location: Arctic, Norway
Posts: 5821
Status: 
Offline
Kazimon wrote:
thank you Oscar showing some of the quality things which i was thinking are normal if you want to make a good watch.
seems that some people on another forum who are trying to blame me doing this by purpose. well let them talk....


Another proof that frustration and jalousy creates only hate inside the head of the simple minds...
They should take it as a lesson and learn to go forward instead of blaming the rain for making them wet...


Lead Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2012 Data 1 Systems
Page processed in 0.0930 seconds (27% database + 73% PHP). 30 queries executed.